All Geothermal Heat Pumps are made to order and have a 4 to 6 week lead time.
All PTAC units require a minimum order of 190 units (truckload only). Lead time is 3 months.
Benefits of the Goodman 96% AFUE 40k BTU Two-Stage Gas Furnace GM9C960403AN
As a high-efficiency system, the GM9C960403AN Goodman gas furnace features many money-saving features. The two-stage, 9-speed furnace uses a superior heat exchanger for better heat transfers to your home. Considered one of the best efficiencies on the market, the GMEC960403AN is a good way to go if you want to lower your gas bill.
Features of Goodman 96% AFUE 40k BTU Two-Stage Gas Furnace
- This furnace is ideal to heat a smaller house (depending on the climate)
- 40,000 BTU 96% AFUE natural gas furnace
- Requires plastic/PVC flue venting
- Can be used in the upflow or horizontal orientation
- Can be converted to an LP furnace with an optional conversion kit (sold separately)
- Innovative design for electrical efficiency, safety, and lower sound output
Heating up to a smaller house in normal conditions, the GMEC960403AN Goodman gas furnace has an input of 40,000 BTUs and an output of 38,400 BTUs. The output in this case is determined by taking the input times the efficiency rating.
The GM9C960403AN Goodman gas furnace is a 96% efficient furnace, making it a condensing setup. This efficiency means that only 4% of the fuel going into the furnace is used up in furnace operations, while 96% of the fuel is used to heat your home. As a condensing furnace, this furnace will need to be vented with plastic or PVC flue venting. If you need to use metal flue venting, you would need an 80% efficient furnace.
With a two-stage burner, the GM9C960403AN provides two heating outputs: one at a 60% heating output and one at a 100% output. The furnace also has a 9-speed ECM motor instead of the last-generation inefficient PSC motor. Both of these built-in upgrades allow for your furnace to adjust the heating output and airflow more precisely to better suit your home’s comfort needs and provide slightly higher efficiency.
With an installation that follows your state and local codes and with online registration, all Goodman furnaces come with 10-year parts and a lifetime heat exchanger warranty through the manufacturer.
The exterior casing on the GM9C960403AN is heavy-gauge steel that is insulated for enhanced protection and to lower air leakage and sound output from normal furnace operation. The hot surface ignitor is more efficient than earlier models and standing pilot lights thanks to its revolutionary new technology. Both of these end up saving you money on installation, maintenance, and bills.
The cost-saving benefits of the Goodman brand don’t stop at efficiency. The GM9C960403AN Goodman furnace can be upflowed or horizontal, increasing the number of ways that your installer can install the system. With the color-coded low-voltage terminals, the installation is faster and easier than standard non-colored systems. Straight from the factory, the GM9C960403AN comes with natural gas valves. However, increasing its versatility in installation, Goodman offers an LP conversion kit (found here at an additional cost) if you need it to be propane instead of natural gas. Not only does the Goodman brand save you money on installation costs, but also with maintenance and warranty work. In the event of a rare warranty issue, the onboard self-diagnostic control board alerts you and your serviceman what is wrong with the unit for most basic issues for a faster solution.
Specifications:
| Weight (in lbs) | 106.000000 |
|---|---|
| Exhaust Flue Requirement | Plastic / PVC |
| Manufacturer | Goodman |
| Furnace Efficiency / AFUE | 96% |
| Heating BTU | 40,000 |
| Blower Motor | 9 Speed - ECM |
| Maximum CFM | 1200 |
| Configuration | Upflow/Horizontal |
| Exhaust Pipe | PVC |
| Flue Location | Right |
| Energy Star | Yes |
| Electrical | 115 V. 1 Phase 60 Hz |
| Burner Stages | Two |
| Fuel Type | Gas |
| Height | 34.5" |
| Width | 14" |
| Depth | 28.75" |
| Warranty | 10 Years with Online Registration |
| Safety Information |
This gas appliance requires a trained technician to install. Improperly connecting gas lines or improperly connecting a gas flue or venting may result in death. By purchasing this item, you are agreeing that you are using a trained technician to install this gas appliance. We will not be responsible for any injury or property damage arising from improper service or service procedures. Whoever installs or services this unit assumes responsibility for any personal injury or property damage that may result. Many jurisdictions require a license to install this equipment.
PROPOSITION 65 WARNING |
Unit Specifications
| Model | DIY-18-HP-230B25 |
|---|---|
| UPC | 810512033515 |
| AHRI Number | 204711123 |
| Bundle Avg Coverage Area | 750 - 900 Sq Ft |
| Bundle Cooling Capacity | 1.5 Ton |
| Bundle Cooling Efficiency | 19 SEER and Above |
| EER | 12.5 |
| Heat Pump Efficiency (HSPF) | 10 |
| Series | DIY |
| Zones | 1 |
| Region Compatibility | Nationwide |
| Popular Applications | Game Room, Garage, Guest Room, Man Cave, Server Room, Sunroom |
| California Residents | see Prop 65 WARNING |
DIY-18-HP-C-230B Specifications:
| Model | DIY-18-HP-C-230B |
|---|---|
| UPC | 810512033430 |
| Avg Coverage Area | 750 - 900 Sq Ft |
| Compressor | Inverter |
| Cooling Capacity | 1.5 Ton |
| Electrical Phase | 1-Phase |
| Heat Pump Efficiency (HSPF) | 10 |
| Line Set Connection Type | Quick Connect |
| Liquid Line Size | 1/4 inch |
| Max Overcurrent Protection | 20 amps |
| Primary Heating Capacity | 15,001 - 20,000 BTU |
| Product Height (in) | 27.64 |
| Product Length (in) | 14.29 |
| Product Width (in) | 33.27 |
| Cooling Efficiency | 19 SEER and Above |
| Series | DIY |
| System Application Type | Ductless Split Systems |
| Voltage | 240 |
| Warranty | 5 Year Parts, 7 Year Compressor |
| Weight (lbs) | 122.3600 |
| Region Compatibility | Nationwide |
DIY-18-HP-WMAH-230B Specifications:
| Model | DIY-18-HP-WMAH-230B |
|---|---|
| UPC | 810512033478 |
| Air Flow Direction | Horizontal |
| Configuration | Wall Mounted |
| Blower Motor | Variable Speed |
| Cooling Capacity | 1.5 Ton |
| Electrical Phase | 1-Phase |
| Line Set Connection Type | Quick Connect |
| Liquid Line Size | 1/4 inch |
| Max Overcurrent Protection | 20 amps |
| Product Height (in) | 13.19 |
| Product Length (in) | 8.9 |
| Product Width (in) | 42.52 |
| Series | DIY |
| Special Features | WiFi Capable |
| Suction Line Size | 1/2 inch |
| System Application Type | Ductless Split Systems |
| Voltage | 240 |
| Warranty | 5 Year Parts, 7 Year Compressor |
| Weight (lbs) | 54.0100 |
Whole Unit Specifications
| Model | DIY-12-HP-115B |
|---|---|
| UPC | 810512033508 |
| AHRI Number | 204711122 |
| Bundle Avg Coverage Area | 500 - 600 Sq Ft |
| Bundle Cooling Capacity | 1 Ton |
| Bundle Cooling Efficiency | 19 SEER and Above |
| EER | 12.7 |
| Heat Pump Efficiency (HSPF) | 10 |
| Series | DIY |
| Zones | 1 |
| Region Compatibility | Nationwide |
| Popular Applications | Game Room, Garage, Guest Room, Man Cave, Server Room, Sunroom |
Outdoor Unit (DIY-12-HP-C-115B) Specifications:
| Model | DIY-12-HP-C-115B |
|---|---|
| UPC | 810512033423 |
| Avg Coverage Area | 500 - 600 Sq Ft |
| Compressor | Inverter |
| Cooling Capacity | 1 Ton |
| Electrical Phase | 1-Phase |
| Heat Pump Efficiency (HSPF) | 10 |
| Line Set Connection Type | Quick Connect |
| Liquid Line Size | 1/4 inch |
| Max Overcurrent Protection | 20 amps |
| Primary Heating Capacity | 10,001 - 15,000 BTU |
| Product Height (in) | 21.81 |
| Product Length (in) | 13.11 |
| Product Width (in) | 31.5 |
| Cooling Efficiency | 19 SEER and Above |
| Series | DIY |
| System Application Type | Ductless Split Systems |
| Voltage | 120 |
| Warranty | 5 Year Parts, 7 Year Compressor |
| Weight (lbs) | 102.2900 |
| Region Compatibility | Nationwide |
Indoor Unit (DIY-12-HP-WMAH-115B) Specifications:
| Model | DIY-12-HP-WMAH-115B |
|---|---|
| UPC | 810512033461 |
| Air Flow Direction | Horizontal |
| Configuration | Wall Mounted |
| Blower Motor | Variable Speed |
| Cooling Capacity | 1 Ton |
| Electrical Phase | 1-Phase |
| Line Set Connection Type | Quick Connect |
| Liquid Line Size | 1/4 inch |
| Max Overcurrent Protection | 20 amps |
| Product Height (in) | 11.69 |
| Product Length (in) | 7.44 |
| Product Width (in) | 31.57 |
| Series | DIY |
| Special Features | WiFi Capable |
| Suction Line Size | 1/2 inch |
| System Application Type | Ductless Split Systems |
| Voltage | 120 |
| Warranty | 5 Year Parts, 7 Year Compressor |
| Weight (lbs) | 37.7000 |
| Room Size (based on 4 Air Changes per Hour) | 750 sq. ft. |
| Recommended For | Allergies, Asthma, Multiple Chemical Sensitivity, Odor & Chemical, Smoke, Mold |
| Best Fit | Ideal for allergy- and asthma-sufferers and those who have multiple chemical sensitivities |
| Height | 23 in |
| Depth |
14.5 in |
| Length | 14.5 in |
| Weight | 47 lbs |
| Air Moved (Max CFM) | 400 CFM |
| Fan speeds | 3 speed centrifugal fan |
| Manufacturer-Suggested Room Size | 1500 sq. ft. |
| Filtration System | Carbon Filter, HEPA Filter, Pre-Filter, Large particle pre-filter |
| Pre-Filter Type | Large particle pre-filter |
| HEPA Filter Type | 60 sq. ft. of true medical-grade HEPA |
| Ozone Emission | None |
| Numbers of Filters to Change | 1 |
| Pre-Filter Replacement | 60 months |
| HEPA Filter Replacement | 60 months |
| Carbon Filter Replacement | 60 months |
| Filter Change Indicator | No |
| Colors | Black and Sandstone |
| Casters | Yes |
| Noise Level Range | 50 dB - 66 dB |
| Amperage | 1.3 Amps |
| Wattage | 132 W |
| Voltage | 110 - 120 V |
| Certifications | CSA Approved |
Austin Air Warranty
- 5 Year Mechanical Warranty
- 5 Year Pro-Rated Filter Warranty
| Model | HHP1418HAH18 |
|---|---|
| UPC | 810063861827 |
| AHRI Number | 206763952 |
| Bundle Avg Coverage Area | 750 - 900 Sq Ft |
| Bundle Cooling Capacity | 1.5 Ton |
| Bundle Cooling Efficiency | 14 SEER |
| EER | 11.7 |
| Heat Pump Efficiency (HSPF) | 8.2 |
| Series | ProDirect |
| Region Compatibility | Nationwide |
| California Residents | see Prop 65 WARNING |
HHP14018 Specifications:
| Model | HHP14018 |
|---|---|
| UPC | 810063861827 |
| Avg Coverage Area | 750 - 900 Sq Ft |
| Compressor | Single Stage |
| Cooling Capacity | 1.5 Ton |
| Electrical Phase | 1-Phase |
| Heat Pump Efficiency (HSPF) | 8.2 |
| Line Set Connection Type | Sweat |
| Liquid Line Size | 3/8 inch |
| Max Overcurrent Protection | 15 amps |
| Primary Heating Capacity | 15,001 - 20,000 BTU |
| Product Height (in) | 25 |
| Product Length (in) | 22 |
| Product Width (in) | 22 |
| Refrigerant | R-410a |
| Cooling Efficiency | 14 SEER |
| Series | ProDirect |
| Suction Line Size | 3/4 inch |
| System Application Type | Central Split Systems |
| Voltage | 240 |
| Warranty | 10 Year Parts, 10 Year Compressor |
| Weight (lbs) | 108.0000 |
| Region Compatibility | Nationwide |
HAH14018 Specifications:
| Model | HAH14018 |
|---|---|
| UPC | 810063861896 |
| Air Flow Direction | Downflow, Horizontal, Upflow |
| Configuration | Floor Mounted |
| Blower Motor | Multi Speed |
| Cooling Capacity | 1.5 Ton |
| Electrical Phase | 1-Phase |
| Heat Strip Compatibility | Up to 10 kW |
| Line Set Connection Type | Sweat |
| Liquid Line Size | 3/8 inch |
| Max Overcurrent Protection | 5 amps |
| Product Height (in) | 46 |
| Product Length (in) | 22 |
| Product Width (in) | 20 |
| Refrigerant | R-410a |
| Series | ProDirect |
| Suction Line Size | 3/4 inch |
| System Application Type | Central Split Systems |
| Voltage | 240 |
| Warranty | 10 Year Parts |
| Weight (lbs) | 134.0000 |
SEER: 16
EER: 8.2
HSPF: 8.9
CFM: 823/588/411
TONNAGE: 3
COOLING CAPACITY: 34500 BTU
HEATING CAPACITY: 36000 BTU
VOLTAGE: 208-230 V
PHASE: 1
CYCLE: 60 Hz
MAX FUSE BREAKER: 40 A
MIN CIRCUIT AMPACITY: 25 A
MOUNT TYPE: Wall
COLOR: White
MAX COVERAGE AREA: 1,500 sq ft
ZONE CAPACITY: 1
REFRIGERANT TYPE: R-410A
REFRIGERANT VOLUME: 119.9 oz
DECIBEL RATING: 35/45/52 dBA
AIR FLOW DIRECTION: 4-way
NUMBER OF SPEEDS: 4 (Variable)
OSCILLATION: Yes
INVERTER: Yes
MIN AMBIENT HEAT: 5 Degrees
F LINE SET LENGTH: 16ft or 25ft
MAX LINESET LENGTH: 164ft Max
LIQUID LINE FITTING: 1/2 in
LIQUID LINE SIZE: 3/8 in
SUCTION LINE FITTING: 3/4 in
SUCTION LINE SIZE: 5/8 in
CONTROL TYPE: LED
CONDENSER FAN MOTOR RPM: 600/750/85
BLOWER MOTOR RPM: 750/950/12
FILTER TYPE: Washable
AUXILIARY HEATER INCLUDED: No
AUXILIARY HEATER AVAILABLE: No
LOW VOLTAGE COMPENSATION: No
OVERLOAD PROTECTION: Yes
ADJUSTABLE THERMOSTAT: Yes
FAN ONLY OPTION: Yes
QUIET MODE Yes
SLEEP MODE: No
AUTO COOL Yes
WIFI COMPATIBILITY: Yes
APP COMPATIBILITY: Yes
WORKS WITH IOS: Yes
WORKS WITH ANDROID: Yes
REMOTE CONTROL INCLUDED: Yes
CERTIFICATIONS: CSA LISTED, CSA CERTIFIED, ENERGY STAR, AHRI
REGISTERED WARRANTY: 5-year Parts/7-year Compressor/1-year
HAS BATTERIES: Yes
CONTAINS CHEMICALS: Yes
CONTAINS AEROSOL: Yes
CONTAINS COMPRESSED GAS: Yes
PROPOSITION 65 WARNING: No
NET DEPTH: 27.24 in
NET HEIGHT: 46.14 in
NET WIDTH: 86.81 in
NET WEIGHT 191.36 lbs.
GROSS WEIGHT: 252.43 lbs.
CONDENSER DEPTH: 16.14 in
CONDENSER HEIGHT: 31.89 in
CONDENSER WIDTH: 37.24 in
CONDENSER WEIGHT: 150.35 lbs
AIR HANDLER DEPTH: 11.10 in
AIR HANDLER HEIGHT: 14.25 in
AIR HANDLER WIDTH: 49.57 in
AIR HANDLER WEIGHT 41.01 lbs
|
Input voltage
|
120V / 60Hz
|
||
| Power consumption (H/M/L) |
140/120/100W (+/-10%)
|
||
| CFM (H/M/L) |
1062/965/830
|
||
| RPM (H/M/L) |
1400/1200/1000 (+/-80)
|
||
| Evaporation capacity (H/M/L) |
1.2/1.0/0.8 Liters/Hr
|
||
| Horsepower |
0.19
|
||
| Power cord length |
81 inches
|
||
| Unit dimension |
24.25W x 15D x 34H in.
|
||
| Shipping dimension |
27 x 17 x 37 in.
|
||
| Net weight |
29.32 lbs
|
||
| Shipping weight |
34 lbs
|
||
In stock items: Products typically ship within 2-3 business days from when you place your order (Please allow 5-7 business days for some MRCOOL products to ship). Due to COVID-19 please allow 7 - 10 days for your order to arrive once you have received shipping confirmation.
Pre-order/Out of stock items: Contact us for estimated shipping timeline. We are experiencing inventory and re-stocking delays due to port congestion. We appreciate your patience and understanding.
High order volume due to COVID-19 may occasionally slow delivery for some items and you may experience extended wait times contacting our Customer Service team.
For the fastest service and online support, please email us at support@airsanctuary.com for information regarding your order.
Read the rest of our shipping policy here.
*Free MRCOOL Heavy Duty Tool Kit w/ Tools ($70 Value)* - while supplies last
- Tool Bag w/ 27 Pockets
- Crescent Wrench Set
- Hole Saw with Arbor