Benefits of the Goodman 92% AFUE 100k BTU Single Stage Gas Furnace GM9S921004CN
The GM9S921004CN Goodman gas furnace features high-quality construction and efficient operation at a great value. The GM9S921004CN single-stage, 9-speed furnace utilizes Goodman's superior heat exchanger design to provide efficient, reliable heating to your home. If you're looking to cut your energy bills and improve your comfort without breaking the bank, your search stops with the Goodman GM9S921004CN.
Features of Goodman 92% AFUE 100k BTU Single Stage Gas Furnace
- This furnace is ideal to heat a smaller house (depending on the climate)
- 100,000 BTU 92% efficient natural gas furnace
- Requires plastic/PVC flue venting
- Can be used in the upflow or horizontal orientation
- Can be converted to an LP furnace with a conversion kit (sold separately)
- Innovative design for electrical efficiency, safety, and lower sound output
The GM9S921004CN Goodman gas furnace is 100,000 BTUs. This BTU count is a measure of the input of the furnace per hour, while the output of this furnace is 92,000 BTUs (100,000 X 92% AFUE) per hour. This 100,000 BTU furnace is usually used to heat a small house in ideal climate conditions.
The GM9S921004CN Goodman gas furnace is 92% efficient, and the standard furnace efficiency on the market today. This means that 92% of the gas going into the furnace is used to heat your home and the remaining 20% is lost out of the flue venting. Please note that all 92% of furnaces must be vented using plastic/PVC flue venting, while anything higher than 90% efficient must be vented using plastic/PVC venting.
The GM9S921004CN Goodman gas furnace is a single-stage furnace that has only one heat output. Regardless of the indoor temperature, this furnace will burn at 100% output whenever the thermostat calls for it. Like a light switch, this furnace’s burner will either be on or off and nothing in between. A single-stage furnace is the standard efficient furnace since every time your furnace turns on the furnace uses the same amount of energy.
From the factory, the GM9S921004CN runs on natural gas. However, all Goodman gas furnaces can be converted to propane using the furnace’s corresponding LP conversion kit, an optional accessory at an additional cost that consists of a replacement set of orifices and springs.
Instead of the last generation PSC blower motor, the GM9S921004CN utilizes a 9-speed ECM motor, which uses less power and provides smarter air circulation. All of this causes an overall increase in the electrical efficiency of your furnace, which saves you money.
With an installation that follows your state and local codes and with online registration, all Goodman furnaces come with 10-year parts and a lifetime heat exchanger warranty through the manufacturer.
The hot surface igniter on modern Goodman furnaces is more durable than previous designs, decreasing related issues and lowering maintenance costs. These hot surface ignitors are also more efficient than standing pilot and older HSI designs, saving you even more money.
The Goodman brand has improved technology from years of production experience, allowing for a long-lasting product that rarely has any issues. However, if something does go wrong on the furnace, the control board has a set of sensors that allow it to diagnose basic issues, allowing for easy troubleshooting and notify the owner if basic maintenance or warranty work is recommended. This increases the overall safety of the unit, for the furnace itself and the occupants of the home where it is installed.
The heavy-gauge steel cabinet on new Goodman furnaces provides adequate protection to the internal mechanisms of the unit. The cabinet is also more air-tight than previous models, allowing for a quiet, more economical unit due to losing less heat and preventing more sound from exiting the unit.
The value of modern Goodman furnaces doesn't end at efficiency. Today’s Goodman furnaces feature many different connection options to reduce installation. The GM9S921004CN model has a more universal design, which consists of its ability to be installed in both an upflow and horizontal configuration. This allows for an easier installation in more locations, from your attic to your basement. The furnace also comes with color-coded low-voltage terminals that allow for a shorter and easier installation time, which decreases installation costs.
|Weight (in lbs)||141.000000|
|Exhaust Flue Requirement||Plastic / PVC|
|Furnace Efficiency / AFUE||92%|
|Blower Motor||9 Speed - ECM|
|Electrical||115 V. 1 Phase 60 Hz|
|Warranty||10 Years with Online Registration|
This gas appliance requires a trained technician to install. Improperly connecting gas lines or improperly connecting a gas flue or venting may result in death. By purchasing this item, you are agreeing that you are using a trained technician to install this gas appliance. We will not be responsible for any injury or property damage arising from improper service or service procedures. Whoever installs or services this unit assumes responsibility for any personal injury or property damage that may result. Many jurisdictions require a license to install this equipment.
PROPOSITION 65 WARNING
In stock items: Products typically ship within 2-3 business days from when you place your order (Please allow 5-7 business days for some MRCOOL products to ship). Due to COVID-19 please allow 7 - 10 days for your order to arrive once you have received shipping confirmation.
Pre-order/Out of stock items: Contact us for estimated shipping timeline. We are experiencing inventory and re-stocking delays due to port congestion. We appreciate your patience and understanding.
High order volume due to COVID-19 may occasionally slow delivery for some items and you may experience extended wait times contacting our Customer Service team.
For the fastest service and online support, please email us at firstname.lastname@example.org for information regarding your order.
Read the rest of our shipping policy here.