Benefits of the Goodman 100k BTU 80% AFUE Multi Speed 2 Stage Gas Furnace - GMEC801004CN
The GMEC801004CN Goodman gas furnace features high-quality construction and efficient operation at a great value. The GMEC801004CN two-stage, multi-speed furnace utilizes Goodman's superior heat exchanger design to provide efficient, reliable heating to your home. If you're looking to cut your energy bills and improve your comfort without breaking the bank, your search stops with the Goodman GMEC801004CN.
QUICK FACTS
- This furnace is ideal to heat a medium-sized house (depending on the climate)
- 100,000 BTU 80% efficient natural gas furnace
- Requires metal flue venting
- Can be used in the upflow or horizontal orientation
- Can be converted to an LP furnace with a conversion kit (sold separately)
- Innovative design for electrical efficiency, safety, and lower sound output
Features of Goodman 100k BTU 80% AFUE Multi Speed 2 Stage Gas Furnace
The GMEC801004CN Goodman gas furnace is 100,000 BTUs. This BTU count is a measure of the input of the furnace per hour, while the output of this furnace is 80,000 BTUs (100,000 X 80% AFUE) per hour. In ideal climate conditions, this 100,000 BTU furnace is usually used to heat a medium-sized house.
80% Efficiency Rating
The GMEC801004CN Goodman gas furnace is 80% efficient, and the standard furnace efficiency on the market today. This means that 80% of the gas going into the furnace is used to heat your home and the remaining 20% is lost out of the flue venting. Please note that all 80% of furnaces must be vented using metal flue venting, while anything higher than 90% efficient must be vented using plastic/PVC venting.
Please note that this furnace does not comply with California Low NOx or Ultra-Low NOx regulations. If you have any questions, please contact us.
The GMEC801004CN Goodman gas furnace is a two-stage furnace that has two heating outputs on the burner: full output on colder winter days and lower output for milder days when the furnace doesn’t have to run quite as much. Two-stage furnaces allow for a more even heat distribution, as the furnace will only kick on the higher stage if the indoor temperature is more than a few degrees away from the desired temperature. Since the lower stage will be used more often, the GMEC801004CN will run quieter than a single-stage system. While the majority of the benefits of a two-stage feature on a furnace are comfort-based, the efficiency of the furnace is slightly higher due to it burning less fuel at its lower stage.
From the factory, the GMEC801004CN runs on natural gas. However, all Goodman gas furnaces can be converted to propane using the furnace’s corresponding LP conversion kit, an optional accessory at an additional cost that consists of a replacement set of orifices and springs.
Instead of the last generation PSC blower motor, the GMEC801004CN utilizes a multi-speed ECM motor, which uses less power and provides smarter air circulation. All of this causes an overall increase in the electrical efficiency of your furnace, which saves you money.
With an installation that follows your state and local codes and with online registration, all Goodman furnaces come with 10-year parts and a lifetime heat exchanger warranty through the manufacturer.
The hot surface igniter on modern Goodman furnaces is more durable than previous designs, decreasing related issues and lowering maintenance costs. These hot surface ignitors are also more efficient than standing pilot and older HSI designs, saving you even more money.
The Goodman brand has improved technology from years of production experience, allowing for a long-lasting product that rarely has any issues. However, if something does go wrong on the furnace, the control board has a set of sensors that allow it to diagnose basic issues, allowing for easy troubleshooting and notify the owner if basic maintenance or warranty work is recommended. This increases the overall safety of the unit, for the furnace itself and the occupants of the home where it is installed.
The heavy-gauge steel cabinet on new Goodman furnaces provides adequate protection to the internal mechanisms of the unit. The cabinet is also more air-tight than previous models, allowing for a quiet, more economical unit due to losing less heat and preventing more sound from exiting the unit.
Specifications:
Model | GMEC801004CN |
---|---|
UPC | 663051590427 |
AHRI Number | 203692616 |
Gas Furnace Efficiency | 80% |
Air Flow Direction | Horizontal, Upflow |
Avg Coverage Area | 1,750 - 2,100 Sq Ft |
Blower Motor | High Efficiency |
Cooling Compatibility (up to) | 4 Ton |
Electrical Phase | 1-Phase |
Exhaust Pipe | Metal |
Fuel Source | Natural Gas |
Gas Valve | Two-Stage |
Max Overcurrent Protection | 15 amps |
Primary Heating Capacity | 95,001 - 100,000 BTU |
Product Height (in) | 33.375 |
Product Length (in) | 28 |
Product Width (in) | 21 |
System Application Type | Central Split Systems |
Vent Connection | 4 inches |
Voltage | 120 |
Warranty | 10 Year Parts, Lifetime Heat Exchanger |
Weight (lbs) | 124.0000 |
California Residents | see Prop 65 WARNING |
In stock items: Products typically ship within 2-3 business days from when you place your order (Please allow 5-7 business days for some MRCOOL products to ship). Due to COVID-19 please allow 7 - 10 days for your order to arrive once you have received shipping confirmation.
Pre-order/Out of stock items: Contact us for estimated shipping timeline. We are experiencing inventory and re-stocking delays due to port congestion. We appreciate your patience and understanding.
High order volume due to COVID-19 may occasionally slow delivery for some items and you may experience extended wait times contacting our Customer Service team.
For the fastest service and online support, please email us at support@airsanctuary.com for information regarding your order.
Read the rest of our shipping policy here.